Made ec_c25519_m62 implementation the default on supported architectures.

[BearSSL] / src / int / i15_moddiv.c

/*
 * Copyright (c) 2018 Thomas Pornin <pornin@bolet.org>
 *
 * Permission is hereby granted, free of charge, to any person obtaining 
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice shall be 
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#include "inner.h"

/*
 * In this file, we handle big integers with a custom format, i.e.
 * without the usual one-word header. Value is split into 15-bit words,
 * each stored in a 16-bit slot (top bit is zero) in little-endian
 * order. The length (in words) is provided explicitly. In some cases,
 * the value can be negative (using two's complement representation). In
 * some cases, the top word is allowed to have a 16th bit.
 */

/*
 * Negate big integer conditionally. The value consists of 'len' words,
 * with 15 bits in each word (the top bit of each word should be 0,
 * except possibly for the last word). If 'ctl' is 1, the negation is
 * computed; otherwise, if 'ctl' is 0, then the value is unchanged.
 */
static void
cond_negate(uint16_t *a, size_t len, uint32_t ctl)
{
        size_t k;
        uint32_t cc, xm;

        cc = ctl;
        xm = 0x7FFF & -ctl;
        for (k = 0; k < len; k ++) {
                uint32_t aw;

                aw = a[k];
                aw = (aw ^ xm) + cc;
                a[k] = aw & 0x7FFF;
                cc = (aw >> 15) & 1;
        }
}

/*
 * Finish modular reduction. Rules on input parameters:
 *
 *   if neg = 1, then -m <= a < 0
 *   if neg = 0, then 0 <= a < 2*m
 *
 * If neg = 0, then the top word of a[] may use 16 bits.
 *
 * Also, modulus m must be odd.
 */
static void
finish_mod(uint16_t *a, size_t len, const uint16_t *m, uint32_t neg)
{
        size_t k;
        uint32_t cc, xm, ym;

        /*
         * First pass: compare a (assumed nonnegative) with m.
         */
        cc = 0;
        for (k = 0; k < len; k ++) {
                uint32_t aw, mw;

                aw = a[k];
                mw = m[k];
                cc = (aw - mw - cc) >> 31;
        }

        /*
         * At this point:
         *   if neg = 1, then we must add m (regardless of cc)
         *   if neg = 0 and cc = 0, then we must subtract m
         *   if neg = 0 and cc = 1, then we must do nothing
         */
        xm = 0x7FFF & -neg;
        ym = -(neg | (1 - cc));
        cc = neg;
        for (k = 0; k < len; k ++) {
                uint32_t aw, mw;

                aw = a[k];
                mw = (m[k] ^ xm) & ym;
                aw = aw - mw - cc;
                a[k] = aw & 0x7FFF;
                cc = aw >> 31;
        }
}

/*
 * Compute:
 *   a <- (a*pa+b*pb)/(2^15)
 *   b <- (a*qa+b*qb)/(2^15)
 * The division is assumed to be exact (i.e. the low word is dropped).
 * If the final a is negative, then it is negated. Similarly for b.
 * Returned value is the combination of two bits:
 *   bit 0: 1 if a had to be negated, 0 otherwise
 *   bit 1: 1 if b had to be negated, 0 otherwise
 *
 * Factors pa, pb, qa and qb must be at most 2^15 in absolute value.
 * Source integers a and b must be nonnegative; top word is not allowed
 * to contain an extra 16th bit.
 */
static uint32_t
co_reduce(uint16_t *a, uint16_t *b, size_t len,
        int32_t pa, int32_t pb, int32_t qa, int32_t qb)
{
        size_t k;
        int32_t cca, ccb;
        uint32_t nega, negb;

        cca = 0;
        ccb = 0;
        for (k = 0; k < len; k ++) {
                uint32_t wa, wb, za, zb;
                uint16_t tta, ttb;

                /*
                 * Since:
                 *   |pa| <= 2^15
                 *   |pb| <= 2^15
                 *   0 <= wa <= 2^15 - 1
                 *   0 <= wb <= 2^15 - 1
                 *   |cca| <= 2^16 - 1
                 * Then:
                 *   |za| <= (2^15-1)*(2^16) + (2^16-1) = 2^31 - 1
                 *
                 * Thus, the new value of cca is such that |cca| <= 2^16 - 1.
                 * The same applies to ccb.
                 */
                wa = a[k];
                wb = b[k];
                za = wa * (uint32_t)pa + wb * (uint32_t)pb + (uint32_t)cca;
                zb = wa * (uint32_t)qa + wb * (uint32_t)qb + (uint32_t)ccb;
                if (k > 0) {
                        a[k - 1] = za & 0x7FFF;
                        b[k - 1] = zb & 0x7FFF;
                }
                tta = za >> 15;
                ttb = zb >> 15;
                cca = *(int16_t *)&tta;
                ccb = *(int16_t *)&ttb;
        }
        a[len - 1] = (uint16_t)cca;
        b[len - 1] = (uint16_t)ccb;
        nega = (uint32_t)cca >> 31;
        negb = (uint32_t)ccb >> 31;
        cond_negate(a, len, nega);
        cond_negate(b, len, negb);
        return nega | (negb << 1);
}

/*
 * Compute:
 *   a <- (a*pa+b*pb)/(2^15) mod m
 *   b <- (a*qa+b*qb)/(2^15) mod m
 *
 * m0i is equal to -1/m[0] mod 2^15.
 *
 * Factors pa, pb, qa and qb must be at most 2^15 in absolute value.
 * Source integers a and b must be nonnegative; top word is not allowed
 * to contain an extra 16th bit.
 */
static void
co_reduce_mod(uint16_t *a, uint16_t *b, size_t len,
        int32_t pa, int32_t pb, int32_t qa, int32_t qb,
        const uint16_t *m, uint16_t m0i)
{
        size_t k;
        int32_t cca, ccb, fa, fb;

        cca = 0;
        ccb = 0;
        fa = ((a[0] * (uint32_t)pa + b[0] * (uint32_t)pb) * m0i) & 0x7FFF;
        fb = ((a[0] * (uint32_t)qa + b[0] * (uint32_t)qb) * m0i) & 0x7FFF;
        for (k = 0; k < len; k ++) {
                uint32_t wa, wb, za, zb;
                uint32_t tta, ttb;

                /*
                 * In this loop, carries 'cca' and 'ccb' always fit on
                 * 17 bits (in absolute value).
                 */
                wa = a[k];
                wb = b[k];
                za = wa * (uint32_t)pa + wb * (uint32_t)pb
                        + m[k] * (uint32_t)fa + (uint32_t)cca;
                zb = wa * (uint32_t)qa + wb * (uint32_t)qb
                        + m[k] * (uint32_t)fb + (uint32_t)ccb;
                if (k > 0) {
                        a[k - 1] = za & 0x7FFF;
                        b[k - 1] = zb & 0x7FFF;
                }

                /*
                 * The XOR-and-sub construction below does an arithmetic
                 * right shift in a portable way (technically, right-shifting
                 * a negative signed value is implementation-defined in C).
                 */
#define M   ((uint32_t)1 << 16)
                tta = za >> 15;
                ttb = zb >> 15;
                tta = (tta ^ M) - M;
                ttb = (ttb ^ M) - M;
                cca = *(int32_t *)&tta;
                ccb = *(int32_t *)&ttb;
#undef M
        }
        a[len - 1] = (uint32_t)cca;
        b[len - 1] = (uint32_t)ccb;

        /*
         * At this point:
         *   -m <= a < 2*m
         *   -m <= b < 2*m
         * (this is a case of Montgomery reduction)
         * The top word of 'a' and 'b' may have a 16-th bit set.
         * We may have to add or subtract the modulus.
         */
        finish_mod(a, len, m, (uint32_t)cca >> 31);
        finish_mod(b, len, m, (uint32_t)ccb >> 31);
}

/* see inner.h */
uint32_t
br_i15_moddiv(uint16_t *x, const uint16_t *y, const uint16_t *m, uint16_t m0i,
        uint16_t *t)
{
        /*
         * Algorithm is an extended binary GCD. We maintain four values
         * a, b, u and v, with the following invariants:
         *
         *   a * x = y * u mod m
         *   b * x = y * v mod m
         *
         * Starting values are:
         *
         *   a = y
         *   b = m
         *   u = x
         *   v = 0
         *
         * The formal definition of the algorithm is a sequence of steps:
         *
         *   - If a is even, then a <- a/2 and u <- u/2 mod m.
         *   - Otherwise, if b is even, then b <- b/2 and v <- v/2 mod m.
         *   - Otherwise, if a > b, then a <- (a-b)/2 and u <- (u-v)/2 mod m.
         *   - Otherwise, b <- (b-a)/2 and v <- (v-u)/2 mod m.
         *
         * Algorithm stops when a = b. At that point, they both are equal
         * to GCD(y,m); the modular division succeeds if that value is 1.
         * The result of the modular division is then u (or v: both are
         * equal at that point).
         *
         * Each step makes either a or b shrink by at least one bit; hence,
         * if m has bit length k bits, then 2k-2 steps are sufficient.
         *
         *
         * Though complexity is quadratic in the size of m, the bit-by-bit
         * processing is not very efficient. We can speed up processing by
         * remarking that the decisions are taken based only on observation
         * of the top and low bits of a and b.
         *
         * In the loop below, at each iteration, we use the two top words
         * of a and b, and the low words of a and b, to compute reduction
         * parameters pa, pb, qa and qb such that the new values for a
         * and b are:
         *
         *   a' = (a*pa + b*pb) / (2^15)
         *   b' = (a*qa + b*qb) / (2^15)
         *
         * the division being exact.
         *
         * Since the choices are based on the top words, they may be slightly
         * off, requiring an optional correction: if a' < 0, then we replace
         * pa with -pa, and pb with -pb. The total length of a and b is
         * thus reduced by at least 14 bits at each iteration.
         *
         * The stopping conditions are still the same, though: when a
         * and b become equal, they must be both odd (since m is odd,
         * the GCD cannot be even), therefore the next operation is a
         * subtraction, and one of the values becomes 0. At that point,
         * nothing else happens, i.e. one value is stuck at 0, and the
         * other one is the GCD.
         */
        size_t len, k;
        uint16_t *a, *b, *u, *v;
        uint32_t num, r;

        len = (m[0] + 15) >> 4;
        a = t;
        b = a + len;
        u = x + 1;
        v = b + len;
        memcpy(a, y + 1, len * sizeof *y);
        memcpy(b, m + 1, len * sizeof *m);
        memset(v, 0, len * sizeof *v);

        /*
         * Loop below ensures that a and b are reduced by some bits each,
         * for a total of at least 14 bits.
         */
        for (num = ((m[0] - (m[0] >> 4)) << 1) + 14; num >= 14; num -= 14) {
                size_t j;
                uint32_t c0, c1;
                uint32_t a0, a1, b0, b1;
                uint32_t a_hi, b_hi, a_lo, b_lo;
                int32_t pa, pb, qa, qb;
                int i;

                /*
                 * Extract top words of a and b. If j is the highest
                 * index >= 1 such that a[j] != 0 or b[j] != 0, then we want
                 * (a[j] << 15) + a[j - 1], and (b[j] << 15) + b[j - 1].
                 * If a and b are down to one word each, then we use a[0]
                 * and b[0].
                 */
                c0 = (uint32_t)-1;
                c1 = (uint32_t)-1;
                a0 = 0;
                a1 = 0;
                b0 = 0;
                b1 = 0;
                j = len;
                while (j -- > 0) {
                        uint32_t aw, bw;

                        aw = a[j];
                        bw = b[j];
                        a0 ^= (a0 ^ aw) & c0;
                        a1 ^= (a1 ^ aw) & c1;
                        b0 ^= (b0 ^ bw) & c0;
                        b1 ^= (b1 ^ bw) & c1;
                        c1 = c0;
                        c0 &= (((aw | bw) + 0xFFFF) >> 16) - (uint32_t)1;
                }

                /*
                 * If c1 = 0, then we grabbed two words for a and b.
                 * If c1 != 0 but c0 = 0, then we grabbed one word. It
                 * is not possible that c1 != 0 and c0 != 0, because that
                 * would mean that both integers are zero.
                 */
                a1 |= a0 & c1;
                a0 &= ~c1;
                b1 |= b0 & c1;
                b0 &= ~c1;
                a_hi = (a0 << 15) + a1;
                b_hi = (b0 << 15) + b1;
                a_lo = a[0];
                b_lo = b[0];

                /*
                 * Compute reduction factors:
                 *
                 *   a' = a*pa + b*pb
                 *   b' = a*qa + b*qb
                 *
                 * such that a' and b' are both multiple of 2^15, but are
                 * only marginally larger than a and b.
                 */
                pa = 1;
                pb = 0;
                qa = 0;
                qb = 1;
                for (i = 0; i < 15; i ++) {
                        /*
                         * At each iteration:
                         *
                         *   a <- (a-b)/2 if: a is odd, b is odd, a_hi > b_hi
                         *   b <- (b-a)/2 if: a is odd, b is odd, a_hi <= b_hi
                         *   a <- a/2 if: a is even
                         *   b <- b/2 if: a is odd, b is even
                         *
                         * We multiply a_lo and b_lo by 2 at each
                         * iteration, thus a division by 2 really is a
                         * non-multiplication by 2.
                         */
                        uint32_t r, oa, ob, cAB, cBA, cA;

                        /*
                         * cAB = 1 if b must be subtracted from a
                         * cBA = 1 if a must be subtracted from b
                         * cA = 1 if a is divided by 2, 0 otherwise
                         *
                         * Rules:
                         *
                         *   cAB and cBA cannot be both 1.
                         *   if a is not divided by 2, b is.
                         */
                        r = GT(a_hi, b_hi);
                        oa = (a_lo >> i) & 1;
                        ob = (b_lo >> i) & 1;
                        cAB = oa & ob & r;
                        cBA = oa & ob & NOT(r);
                        cA = cAB | NOT(oa);

                        /*
                         * Conditional subtractions.
                         */
                        a_lo -= b_lo & -cAB;
                        a_hi -= b_hi & -cAB;
                        pa -= qa & -(int32_t)cAB;
                        pb -= qb & -(int32_t)cAB;
                        b_lo -= a_lo & -cBA;
                        b_hi -= a_hi & -cBA;
                        qa -= pa & -(int32_t)cBA;
                        qb -= pb & -(int32_t)cBA;

                        /*
                         * Shifting.
                         */
                        a_lo += a_lo & (cA - 1);
                        pa += pa & ((int32_t)cA - 1);
                        pb += pb & ((int32_t)cA - 1);
                        a_hi ^= (a_hi ^ (a_hi >> 1)) & -cA;
                        b_lo += b_lo & -cA;
                        qa += qa & -(int32_t)cA;
                        qb += qb & -(int32_t)cA;
                        b_hi ^= (b_hi ^ (b_hi >> 1)) & (cA - 1);
                }

                /*
                 * Replace a and b with new values a' and b'.
                 */
                r = co_reduce(a, b, len, pa, pb, qa, qb);
                pa -= pa * ((r & 1) << 1);
                pb -= pb * ((r & 1) << 1);
                qa -= qa * (r & 2);
                qb -= qb * (r & 2);
                co_reduce_mod(u, v, len, pa, pb, qa, qb, m + 1, m0i);
        }

        /*
         * Now one of the arrays should be 0, and the other contains
         * the GCD. If a is 0, then u is 0 as well, and v contains
         * the division result.
         * Result is correct if and only if GCD is 1.
         */
        r = (a[0] | b[0]) ^ 1;
        u[0] |= v[0];
        for (k = 1; k < len; k ++) {
                r |= a[k] | b[k];
                u[k] |= v[k];
        }
        return EQ0(r);
}