#include <stddef.h>
#include <stdint.h>
+#include "bearssl_rand.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
/** \file bearssl_ec.h
*
* # Elliptic Curves
*/
extern const br_ec_impl br_ec_p256_m15;
+/**
+ * \brief EC implementation "m31" for P-256.
+ *
+ * This implementation uses specialised code for curve secp256r1 (also
+ * known as NIST P-256), relying on multiplications of 31-bit values
+ * (MUL31).
+ */
+extern const br_ec_impl br_ec_p256_m31;
+
+/**
+ * \brief EC implementation "m62" (specialised code) for P-256.
+ *
+ * This implementation uses custom code relying on multiplication of
+ * integers up to 64 bits, with a 128-bit result. This implementation is
+ * defined only on platforms that offer the 64x64->128 multiplication
+ * support; use `br_ec_p256_m62_get()` to dynamically obtain a pointer
+ * to that implementation.
+ */
+extern const br_ec_impl br_ec_p256_m62;
+
+/**
+ * \brief Get the "m62" implementation of P-256, if available.
+ *
+ * \return the implementation, or 0.
+ */
+const br_ec_impl *br_ec_p256_m62_get(void);
+
+/**
+ * \brief EC implementation "m64" (specialised code) for P-256.
+ *
+ * This implementation uses custom code relying on multiplication of
+ * integers up to 64 bits, with a 128-bit result. This implementation is
+ * defined only on platforms that offer the 64x64->128 multiplication
+ * support; use `br_ec_p256_m64_get()` to dynamically obtain a pointer
+ * to that implementation.
+ */
+extern const br_ec_impl br_ec_p256_m64;
+
+/**
+ * \brief Get the "m64" implementation of P-256, if available.
+ *
+ * \return the implementation, or 0.
+ */
+const br_ec_impl *br_ec_p256_m64_get(void);
+
/**
* \brief EC implementation "i15" (generic code) for Curve25519.
*
*/
extern const br_ec_impl br_ec_c25519_m31;
+/**
+ * \brief EC implementation "m62" (specialised code) for Curve25519.
+ *
+ * This implementation uses custom code relying on multiplication of
+ * integers up to 62 bits, with a 124-bit result. This implementation is
+ * defined only on platforms that offer the 64x64->128 multiplication
+ * support; use `br_ec_c25519_m62_get()` to dynamically obtain a pointer
+ * to that implementation. Due to the specificities of the curve
+ * definition, the following applies:
+ *
+ * - `muladd()` is not implemented (the function returns 0 systematically).
+ * - `order()` returns 2^255-1, since the point multiplication algorithm
+ * accepts any 32-bit integer as input (it clears the top bit and low
+ * three bits systematically).
+ */
+extern const br_ec_impl br_ec_c25519_m62;
+
+/**
+ * \brief Get the "m62" implementation of Curve25519, if available.
+ *
+ * \return the implementation, or 0.
+ */
+const br_ec_impl *br_ec_c25519_m62_get(void);
+
+/**
+ * \brief EC implementation "m64" (specialised code) for Curve25519.
+ *
+ * This implementation uses custom code relying on multiplication of
+ * integers up to 64 bits, with a 128-bit result. This implementation is
+ * defined only on platforms that offer the 64x64->128 multiplication
+ * support; use `br_ec_c25519_m64_get()` to dynamically obtain a pointer
+ * to that implementation. Due to the specificities of the curve
+ * definition, the following applies:
+ *
+ * - `muladd()` is not implemented (the function returns 0 systematically).
+ * - `order()` returns 2^255-1, since the point multiplication algorithm
+ * accepts any 32-bit integer as input (it clears the top bit and low
+ * three bits systematically).
+ */
+extern const br_ec_impl br_ec_c25519_m64;
+
+/**
+ * \brief Get the "m64" implementation of Curve25519, if available.
+ *
+ * \return the implementation, or 0.
+ */
+const br_ec_impl *br_ec_c25519_m64_get(void);
+
/**
* \brief Aggregate EC implementation "m15".
*
*/
extern const br_ec_impl br_ec_all_m15;
+/**
+ * \brief Aggregate EC implementation "m31".
+ *
+ * This implementation is a wrapper for:
+ *
+ * - `br_ec_c25519_m31` for Curve25519
+ * - `br_ec_p256_m31` for NIST P-256
+ * - `br_ec_prime_i31` for other curves (NIST P-384 and NIST-P512)
+ */
+extern const br_ec_impl br_ec_all_m31;
+
+/**
+ * \brief Get the "default" EC implementation for the current system.
+ *
+ * This returns a pointer to the preferred implementation on the
+ * current system.
+ *
+ * \return the default EC implementation.
+ */
+const br_ec_impl *br_ec_get_default(void);
+
/**
* \brief Convert a signature from "raw" to "asn1".
*
const void *hash, size_t hash_len,
const br_ec_public_key *pk, const void *sig, size_t sig_len);
+/**
+ * \brief Get "default" ECDSA implementation (signer, asn1 format).
+ *
+ * This returns the preferred implementation of ECDSA signature generation
+ * ("asn1" output format) on the current system.
+ *
+ * \return the default implementation.
+ */
+br_ecdsa_sign br_ecdsa_sign_asn1_get_default(void);
+
+/**
+ * \brief Get "default" ECDSA implementation (signer, raw format).
+ *
+ * This returns the preferred implementation of ECDSA signature generation
+ * ("raw" output format) on the current system.
+ *
+ * \return the default implementation.
+ */
+br_ecdsa_sign br_ecdsa_sign_raw_get_default(void);
+
+/**
+ * \brief Get "default" ECDSA implementation (verifier, asn1 format).
+ *
+ * This returns the preferred implementation of ECDSA signature verification
+ * ("asn1" output format) on the current system.
+ *
+ * \return the default implementation.
+ */
+br_ecdsa_vrfy br_ecdsa_vrfy_asn1_get_default(void);
+
+/**
+ * \brief Get "default" ECDSA implementation (verifier, raw format).
+ *
+ * This returns the preferred implementation of ECDSA signature verification
+ * ("raw" output format) on the current system.
+ *
+ * \return the default implementation.
+ */
+br_ecdsa_vrfy br_ecdsa_vrfy_raw_get_default(void);
+
+/**
+ * \brief Maximum size for EC private key element buffer.
+ *
+ * This is the largest number of bytes that `br_ec_keygen()` may need or
+ * ever return.
+ */
+#define BR_EC_KBUF_PRIV_MAX_SIZE 72
+
+/**
+ * \brief Maximum size for EC public key element buffer.
+ *
+ * This is the largest number of bytes that `br_ec_compute_public()` may
+ * need or ever return.
+ */
+#define BR_EC_KBUF_PUB_MAX_SIZE 145
+
+/**
+ * \brief Generate a new EC private key.
+ *
+ * If the specified `curve` is not supported by the elliptic curve
+ * implementation (`impl`), then this function returns zero.
+ *
+ * The `sk` structure fields are set to the new private key data. In
+ * particular, `sk.x` is made to point to the provided key buffer (`kbuf`),
+ * in which the actual private key data is written. That buffer is assumed
+ * to be large enough. The `BR_EC_KBUF_PRIV_MAX_SIZE` defines the maximum
+ * size for all supported curves.
+ *
+ * The number of bytes used in `kbuf` is returned. If `kbuf` is `NULL`, then
+ * the private key is not actually generated, and `sk` may also be `NULL`;
+ * the minimum length for `kbuf` is still computed and returned.
+ *
+ * If `sk` is `NULL` but `kbuf` is not `NULL`, then the private key is
+ * still generated and stored in `kbuf`.
+ *
+ * \param rng_ctx source PRNG context (already initialized).
+ * \param impl the elliptic curve implementation.
+ * \param sk the private key structure to fill, or `NULL`.
+ * \param kbuf the key element buffer, or `NULL`.
+ * \param curve the curve identifier.
+ * \return the key data length (in bytes), or zero.
+ */
+size_t br_ec_keygen(const br_prng_class **rng_ctx,
+ const br_ec_impl *impl, br_ec_private_key *sk,
+ void *kbuf, int curve);
+
+/**
+ * \brief Compute EC public key from EC private key.
+ *
+ * This function uses the provided elliptic curve implementation (`impl`)
+ * to compute the public key corresponding to the private key held in `sk`.
+ * The public key point is written into `kbuf`, which is then linked from
+ * the `*pk` structure. The size of the public key point, i.e. the number
+ * of bytes used in `kbuf`, is returned.
+ *
+ * If `kbuf` is `NULL`, then the public key point is NOT computed, and
+ * the public key structure `*pk` is unmodified (`pk` may be `NULL` in
+ * that case). The size of the public key point is still returned.
+ *
+ * If `pk` is `NULL` but `kbuf` is not `NULL`, then the public key
+ * point is computed and stored in `kbuf`, and its size is returned.
+ *
+ * If the curve used by the private key is not supported by the curve
+ * implementation, then this function returns zero.
+ *
+ * The private key MUST be valid. An off-range private key value is not
+ * necessarily detected, and leads to unpredictable results.
+ *
+ * \param impl the elliptic curve implementation.
+ * \param pk the public key structure to fill (or `NULL`).
+ * \param kbuf the public key point buffer (or `NULL`).
+ * \param sk the source private key.
+ * \return the public key point length (in bytes), or zero.
+ */
+size_t br_ec_compute_pub(const br_ec_impl *impl, br_ec_public_key *pk,
+ void *kbuf, const br_ec_private_key *sk);
+
+#ifdef __cplusplus
+}
+#endif
+
#endif
projects / BearSSL / blobdiff